HOUSEHOLD / ORIGINAL DESIGN
Pocket tray
A little landing spot for spare buttons, tokens and everyday bits.
96 × 64 × 16 mm
Version 1.0.0 · millimeters · single-color PLA
Place it on the plate
Print with the broad flat base on the plate and the opening facing up. Internal space is 91.2 x 59.2 x 14 mm. Not for food, liquids, hot objects or safety-critical storage.
Suggested starting points
For PLA and an actual 0.4 mm nozzle: a compatible 0.20 mm layer-height process, 3 wall loops, 4 top and 4 bottom shell layers, 15% infill. Start base-down with supports off and no brim, then inspect the slice. These are suggestions, not certified presets.
Select the actual Bambu Lab P2S, installed nozzle, build plate and filament presets in Bambu Studio. Use their temperature and speed defaults. No AMS is required. Check dimensions, first-layer contact, shell closure, overhangs and all warnings before initiating a print yourself.
Full beginner printing guide →Use it thoughtfully
For light, non-critical organization or learning only. Not for food, heat, electrical, medical, structural, weapon or safety-critical use. Follow the printer manufacturer's safety and ventilation guidance.
Make it your own
Change length and width for your space; keep the wall at least 1.6 mm and the base at least 1.2 mm.
| Parameter | Default | Allowed range |
|---|---|---|
| length | 96 mm | 30 to 200 |
| width | 64 mm | 24 to 200 |
| height | 16 mm | 6 to 50 |
| wall | 2.4 mm | 1.6 to 5 |
| base | 2 mm | 1.2 to 5 |
| dividers | 0 count | 0 to 4 |
Additional relationship checks apply. Model notes describe the default dimensions; re-check clearances for variants.
python -m tools.cli parameters pocket-tray
python -m tools.cli build pocket-tray --output build/my-variantLearn the AI-assisted creation workflow →
What we checked
- Generated: yes
- Software checks: passed on the exported STL
- Slicer review: not performed
- Physical print: not performed
92 triangles. Closed, consistently wound edges; finite, nondegenerate faces; connected mesh; positive volume; Z=0 placement within the P2S build envelope. These limited checks do not prove printability or detect every possible geometry defect.
STL SHA-256: 2280b555c67ae9dadb8bb408d19e6d8695d5ab4bee7307e5923f93396207caa9
Variant ID: 87866ae342398c29f6b650cb075deffcca6916ac7e907799e6523f195ea4e269
Suggested recipe: p2s-pla-0.4-v1 (unverified). Exact design-source hashes and separate evidence scope are in the passport.
Share a print result: successes and failures welcome →
Include model version, variant ID, STL hash and actual settings. Public reports are observations, not automatic certification.
Original design by OpenPrintLab contributors. CC BY 4.0; keep attribution and indicate changes. Tooling code has a separate MIT license.